A flat panel door can be defined as a door in which the panel has no bevel or hip raise. It can still be considered a five piece door, as it consists of two stiles, two frames and a panel. The stiles are the vertical members of the frame, while the rails are the [...]
|
|||||
 Loading ... |
This is the process I use for building an end grain cutting board like the one below. I made this using maple and cherry. I started with 2 pieces of maple and 2 pieces of cherry. Each piece was 3″ x 30″ and approximately 3/4″ thick. You can use thicker boards if that is [...] I am making four pen boxes, two from hickory and two from oak. I find it more efficient to make a production run of a number of boxes than just a single box. These four boxes took me two hours to make, not including the finishing. Short of breaking child labour laws you can’t make these boxes for less than what you buy them. However, they are a fun project and enable you to use special wood for pen boxes which you can’t get commercially.
You can click on any of the images to see a larger version. |
||||
|
Copyright © 2010 Syzygy … - All Rights Reserved |
|||||
Recent Comments